ELECTRONICS/ELECTRICAL
Catalog Home
BATTERY
Jerry Bickel Tray
Description: For strong and lightweight battery mounts, the JBRC battery mount kit is constructed of .050 4130 chromoly material and designed for use with group 24 batteries. Single tray weighs 1-1/4 lbs dual 2 lbs. Features hollow 3/8" diameter hold down bolts. Easily installed in trunk area of most applications and is available in dual or single mount styling.
JBRC1025 Single battery tray
Price: $90.00
Jerry Bickel Switch Kit
Description: Actuated by a push/pull rod, this quick disconnect power switch mounts to your chassis with a 4130 .090 chromoly mounting plate. The actuating rod is connected to the switch by an aluminum CNC lever. This kit comes complete with H/D 300 amp switch, mounting plate, CNC lever, push/pull rod, knob, and quick pin.
JBRC1027HD On/Off switch kit, heavy duty
Price: $99.00
XS Power Battery
Description: XS Power AGM batteries are some of the lightest 12, 14, and 16 V racing batteries on the market. Independent test results have proven that they outperform other batteries weighing 10-20 lbs. more. Their cutting-edge lead acid battery technology produces more energy in a smaller space because each cell is compressed before insertion into the case. This creates efficient power-producing packages that are completely sealed with no need to ever add water. This, combined with being an inch shorter than the competitors, means that these batteries will fit in places where space is a premium. By design, the entire line of XS Power AGM batteries has excellent deep-cycling ability and ultra-low internal resistance, resulting in high cranking amps and excellent vibration resistance. These batteries are non-spillable and can be mounted in any position (except upside-down). 16 V, AGM, 500 cold cranking amps, top post, 10.24 in. x 6.75 in. x 7.2 in.
XSP S1600 AGM Battery
Price: $339.99
XS Power Battery Charger
Description: XS Power 16 V AGM battery chargers are designed to charge 16 volt batteries only. Features include 20 amp maximum output, two charging modes, LED indicators, ammeter to monitor status, 6 ft. heavy-duty cable with clamps, built-in cooling fan for reliability, compact size, 16 AGM compatible.
XSP 1004 Battery charger
Price: $234.99
COMPUTERS AND COMPONENTS
Holley Pro Dash
Description: Holley EFI 6.86 in. Pro Dash touch screens deliver over 200 monitoring channels of reliable real-time data in a more compact, full HD package suitable for nearly any motorsports application. Pro Dash units are completely customizable for use in a variety of motorsports applications with a 6.86 in. 1280x480 resolution, low-glare, high-brightness, high-contrast, full-color capacitive touch screen that's easy to view--even in sun. They offer plug-and-play connection to all Holley EFI systems, as well as weather-resistant aluminum housings featuring flexible mounting options. Monitor the power of your Holley EFI system at a glance with Pro Dash touch screens.
553-112 6.86" Pro Dash touch screen
Price: $999.95
Holley Dominator
Description: Holley Dominator EFI vehicle management systems are intended for all engine applications, from street to high-end racing. They have nearly unlimited capabilities to control any power adder, input, or output that you can throw at them. Plug-and-play control of factory GM 24x and 58x LSX engines. Internal data logging standard with a huge 2 GB of memory. Self-tuning fuel table strategy greatly simplifies tuning process. Store and change between four calibrations
554-114 Dominator vehicle management system
Price: $2,108.95
STARTERS
Meziere True Start
Description: Fits big and small block Chevy with 139 tooth flexplate. Recommended for engines up to 700 cubic inches and larger. Custom gear reduction for the best cranking power and rotational speed. Offset design clears nearly all kickout style oil pans. Innovative design provides excellent gear support without the nose. 360 degree clocking in 10 degree increments. 2 high strength precision starter bolts with washers and shim included. Our starters are tested to the extreme and are not sold until everything is right. Standard testing includes amp draw, power and rotational speed under load as well as free rev testing to ensure proper balance of internal rotating parts.
TST400 True Start for BBC/SBC, 400 Series for 139 tooth.
Price: $646.72
Meziere Flexplate Wrench
Description: All steel construction, hardened steel clamp faces with serrations for a positive grip, slim design allows a straight pull even with a mid-plate, fits most large diameter plates. Works well with twelve pitch plates that have 168, 166 or 164 teeth and with ten pitch plates that have 140, 139 or 136 teeth. Black oxide finish with laser marking.
FPA1001 Flexplate wrench, slim
Price: $254.59
Meziere Flexplate
Description: Concentric machined to .005". One piece design - 100% machined. Proprietary heat treating process. Chamfered gear tooth provides better engagement. Fits big block Mopar with 8 bolt crank. 139 tooth ring gear, 10 pitch tooth profile.
Converter pattern 1 - 3 holes 7/16" diameter on 10.75" bolt circle.
Converter pattern 2 - 3 holes 7/16" diameter on 11.50" bolt circle.
Converter pattern 3 - 6 holes 7/16" diameter on 10.75" bolt circle.FPS027 True billet flexplate, Mopar big block, 139 tooth, Pro Mod design, 8 bolt crank
Price: $941.43
WIRING
Bickel Delay Box Mount Kit
Description: Lightweight chromoly construction. Two mounting tubes included. Remove quick pin and relocate to remote mount for transmission tunnel removal.
JBRC1078A Delay box mount
Price: $59.00
B&M Launch Control
Description: B&M launch controls are the choice for performance and dependability, and can be used to control either your front or rear brakes. They're intended primarily as brake-locking devices for drag racing, but they also can be used on the street as hill-holders.
46075 Launch control
Price: $65.55
B&M Remote Buttons
Description: The universal remote button and spiral cords from B&M are great all-around units and are ideal for bracket racing. They are designed for use with trans-brake, launch control, and nitrous systems. The switch contains self-cleaning terminals and a 1 lb. spring for a light "snap" feel. Rated at 12 amps.
46003 Standard button and cord
Price: $72.10
Description: B&M remote mushroom cap button and cord assemblies are ideal for racers who wear heavy gloves and cannot feel the light microswitch, or those who race with multi-hit delay boxes. They contain a lightweight spiral cord and self-cleaning terminals, and have a bounce-free operation. They are also ideal for Full and Pro Tree applications. Rated at 12 amps.
46013 Mushroom button and cord
Price: $78.66
Meziere Water Pump Relay Kit
Description: Use this relay kit to ensure proper power supply to your electric water pump. In some installations the wire used to trigger the pump is not large enough to carry the additional load of the pump. This kit will cure the problem of insufficient power delivery due to undersized wire or switches.
WIK346 Water pump relay kit
Price: $43.87
Speedwire Remote Relay
Description: This relay can be used for main power disconnect for race cars with front battery location. A switch in the rear can be used to trigger this relay with only small trigger wires, eliminating the bulky heavy battery cable running from the rear to the front. This relay would be located in the front near the battery. This relay is capable of 500 amps continuous and 2000 amps in rush current, with a small package measuring 2.5 inches tall and 2.5 inches wide. It is the most rugged reliable heavy amperage relay used. This relay is also used in our commercial applications.
REL-500 Remote relay shutoff
Price: $210.00
Speedwire 8-bay Switch Panel
Description: This is Speedwire's newest addition to their switch panels. CNC machined out of billet aluminium and anodized black, these panels are made in a 6, 8, and 10 switch configuration. There is also an optional LED interior light that is at the bottom of the switch panel, with its own tiny toggle switch. This light comes in handy for night racing; no need to have your crew member bring a flash light to look inside the car, as this LED light is bright enough to brighten any interior. Speedwire now offers back light laser etched switch covers, with custom switch cover engraving.
SW-8 8 Switch panel, 14 relay controller, data cable
Price: $1,350.00
Speedwire Switch Panel Brackets
Description: These billet aluminum brackets come in the more popular 1-5/8” ID, but other sizes are available on request. These mounting brackets can be used to mount switch panel and other components to roll bar.
SW-BB Billet aluminum switch panel brackets
Price: $65.00
NAVIGATE SITE:
